ITR ANTIWEAR HYDRAULIC oils blended from highly refined base stocks and carefully selected additives to get the possible lubrication characteristics. These oils are recommended for circulation systems requiring oils with good load bearing capacity in applications where anti-wear properties are beneficial. These oils have excellent protection against wear in wide range of pumps and in all the active hydraulic components.
PERFORMANCE STANDARDS
IPSS 1-09-022,
Vickers v-104c vane pump test
Meets the requirements of German hydraulic fluid standard DIN 51524 parts2
TYPICAL CHARACTERISTICS OF AW32
Kinematic Viscosity @ 40 °C (ASTM D 445): 32-34
Kinematic Viscosity @100 °C (ASTM D 445): 5.5-6.0
Viscosity Index (ASTM D 2270): MIN 95
Pour point (ASTM D 97): <-27
Flashpoint (ASTM D 92 & 93): > 210 DEG.C
TYPICAL CHARACTERISTICS OF AW46
Kinematic Viscosity @ 40 °C (ASTM D 445): 44-48
Kinematic Viscosity @100 °C (ASTM D 445): 6.5-7.2
Viscosity Index (ASTM D 2270): MIN 95
Pour point (ASTM D 97): <-24
Flashpoint (ASTM D 92 & 93): > 215 DEG.C
TYPICAL CHARACTERISTICS OF AW68
Kinematic Viscosity @ 40 °C (ASTM D 445): 65-70
Kinematic Viscosity @100 °C (ASTM D 445): 8.5-9.0
